Kara Power Tools Ltd.

HIGH SPEED CUT - OFF MACHINE - CC16 (3 PHASE)

FEATURES

APPLICATIONS

Cutting off the following materials:

Categories : Cutters , Cut Off Machine

UPC : CC16 (3 PHASE)

PRECAUTIONS ON USING CUT-OFF MACHINE

Always apply a trial run.
Handle the cut-off wheel with care.
Start cutting only after motor revolution full speed.
Promptly cut OFF the switch when abnormality observed.
Use the normal cut-off wheel on its normal working surface.
Guard against cut-off sparks.
Properly replace the cut-off wheel.
A revolving cut-off wheel should never be touched.
Pay attention to cut-off wheel preservation.
Handle cut-off wheel clamping parts with care.
Keep hands out of the line of cut-off wheel.
Do not perform any operation freehand.
Never reach around or behind cut-off wheel.
Shut off power and wait for cut-off wheel to stop before servicing and adjusting tool.
Replacement cut-off wheel must be the same as the specification shown on Page 4, as the use of any other type of cut-off wheel will void the warranty.

SPECIFICATIONS

Capacity: Bar Dia.	75mm (3")
Capacity:Pipe Dia.	130mm (5-1/8")
Capacity:Shaped Steel	110 x 110mm (4-3/8 x 4-3/8")
Power Output	2,200W or 3,700W
No Load Speed : at 2,200W: 50Hz	2,290/min.
No Load Speed : at 2,200W: 60Hz	2,730/min.
No Load Speed : at 3,700W: 50Hz	2,430/min.
No Load Speed : at 3,700W: 60Hz	2,900/min.
Dimensions (W x L x H)	424 x 894 x 965mm(16-11/16 x 35-3/16 x 38")
Weight	86.0kg (189.0 lbs.) for 2,200W spec, 96.0kg (211.5 lbs.) for 3,700W spec
Standard Accessories	Cut-off Wheel, Wrenches